How About Wismec SINUOUS FJ 200 Kit ?

Today we are talking about a novelty from the company Wismec and the already familiar designer Sinuous – a set of a cliromiser and box mod called Sinuous FJ200 Kit.

As we know, the first fruit of cooperation between the Chinese company Wismec and the designer with the pseudonym Sinuous was the Predator 228. The device turned out to be quite good, although it did not bring any fresh ideas to the wapping industry. However, because of a rather large percentage of marriage and poor quality performance, “Predator” received a flurry of criticism from the users and did not have much popularity. Today we will look at such a continuation of Predator 228 from all the same manufacturer and all the same designer, however, already under a different name and with some other “chips”. Meet the Wismec Sinuous FJ200.

At first glance at the Wismec Sinuous FJ200 Kit, it is immediately clear who made the hand to create the boxman’s design. And I have to say, it is necessary to say, very weakly, since the appearance of the device almost completely repeats Predator 228, except for a couple of minor features. In other words, the company Wismec.

Wismec SINUOUS FJ 200 Kit
How outwardly and constructively to find here a lot of differences will not work. The basic controls of the Sinuous FJ200 look and are in the same places as the Predator. Do not do anything and the Fire button disguised as the sidebar. But what really has changed in our novelty today is the maximum output power (now it is 200 watts) and the batteries. The Sinuous FJ200 has a built-in 4600mAh battery that supports charging up to 2A. Wismec company claims about some innovative and safe charging system, preventing excessive heating of the battery.

The “whale” version of the boxman is completed with a new unattended tank from Wismec called DIVIDER.

DIVIDER also works on new evaporators, which have so far only two types, one of which is designed for a fairly modest soaring, and the second can already generate a decent amount of steam at a power of up to 120 watts.

An interesting feature of DIVIDER is the possibility of changing the volume of the liquid. This is realized thanks to a special spacer, the installation of which the useful capacity is simply superseded.

The tank was already equipped with a branded filling system from Wismec with a retractable top cover. The manufacturer did not forget and equip his device with a tightening ring with a rotating ring from below.

Returning to the boxy Wismec Sinuous FJ200 Kit, I would like to note the correct location of the connector. Atomizers will be wound strictly in the middle of the device and the maximum diameter that will fit here is 28 mm.

As already mentioned above, the Fire button in the Sinuous FJ200 is implemented in a similar way to the “Predator” image and is hidden. To press the button it will be enough just to squeeze the device in your hand. An additional chip can be called a light indication in the form of a separately output LED.

Wismec SINUOUS FJ 200 Kit
Technical specifications Wismec Sinuous FJ200:
Dimensions: 45mm * 29mm * 123.4mm
Weight: 264g
Capacity: 2ml / 4ml
Operating modes: VW / TC-Ni / TC-Ti / TC-SS / TCR
Output power: 1-200W
Voltage: 0.5 to 9V
Output current: up to 50A
Resistance range: 0.05Ω-1.5Ω (TC) /0.1Ω-3.5Ω (VW)
Temperature range: 100 ° C-315 ° C / 200 ° F-600 ° F
Charge up to 2A
Battery capacity: 4600mAh

Strong Recommend:
cheap vape deals
SMOANT Gaia
asvape michael mod
snowwolf vfeng

iJoy Captain/Genie PD270 and Capo Kit are on sale

iJoy Captain PD270’s deep, spring-loaded (albeit tightly) 510 connection accurately read and fired every atomizer I threw at it, which is more than I can say about most mods in my collection. Better yet, all my tanks and RDAs sat perfectly flush, with zero gaps to be found. Captain has a maximum power output of 234 watts, which is a bit better than the 220W standard of dual-18650 battery devices. The battery life of the Captain PD270 is also simply phenomenal. It’s only $42.79 and free shipping on Urvapin, get it via this link: iJoy Captain PD270 234W Mod.

The Genie PD270 is another powerful, dual battery box mod from iJoy. The iJoy Genie is the standard size in terms of width and thickness. It is more of an oval shape than anything. It feels very natural in the hand. You don’t feel any exertion gripping and holding the mod because it melds with the natural curves of your palm. You can get it with $45.79 and enjoy free shipping on Urvapin via this link: iJoy Genie PD270 234W NI/TI/SS Mod

 ijoy genie pd270

iJoy Capo is the newest, full vape setup from iJoy. The Capo 100w box mod is matched with the Captain Mini Tank. This tank features a unique shape, attractive colors, compact size, dense vapor, 510 drip tip. It adopts a unique top slide-open fill system which is simple and convenient, and can reduce the pressure onto the atomizer and prevent leakage. The coil head adopts the newest pull-plug design, which is simple and practical. It’s only $55.79 and free shipping on Urvapin, get it via this link: iJoy Capo 100 Kit

Best Recommend:
buy electronic cigarette online
IJOY CAPO 100 KIT
smok priv v8
vaporesso swag kit

Boxer of electronic cigarette Geekvape AEGIS

Today I would like to tell you about the boxmode, which has no analogues at the moment. The main advantage of brutal Geekvape Aegis Mod from Geekvape is protection from water, dust, dirt, falls according to IP67 standards and MIL STD 810G-516.6.

Under the cut we will examine it from all sides, we will dip it in water and throw it. All interested are welcome.

Information for those who do not want to see reviews of electronic cigarettes in their own tape: in the upper right corner of the page click on “Settings”. Next, go to the “Display of materials” page. In the window that opens, mark “Electronic cigarettes” and click on the “save settings” button. After the done actions, you will no longer see unpleasant material.

Packaging

Supplied in a box of cardboard.

On the reverse side description and scratch code for checking originality.

The kit consists of: a boxman, instructions, o-rings, a cap for the usb port, screws and an adapter under 18650. There is also a version with a 26650 battery.

Appearance
Height – 88 mm
Width – 46.8 mm
Thickness – 37.8 mm
Weight – 202 grams

Available in four colors. Only the metal frame and the leather insert differ.

It is made of zinc alloy and aluminum. The first thing you pay attention to, after opening the box, is the smell of cheap Chinese shoes. On the first day he even interrupted the taste of the liquid. The build quality leaves much to be desired. There are superfluous cracks and inconsistencies of some decorative elements. The rubber insert on most of the device is just some kind of horror. She is constantly in mud and nap. Clean only happens in the first minutes after washing under running water. Looking at the promo photos on the Internet, I expected to get a three-hundred-foot brick, but in reality the mod was very convenient to use. In the hand lies like a poured. But that’s how it is too big for a single battery. However, for the sake of security, something must be sacrificed.

On the front side are:
The button “Fire”. The click is distinct, pleasant and not loud. The button itself sits tight and does not stagger.
0.96 “display.It is especially worth noting that in the off state it completely merges with the entire front glossy plastic panel.This is not often found.
The “±” buttons. But their click is heard from another room. Are located somehow very close to each other. Sometimes you can accidentally press both. Also not rattling.

On the back there is supposedly a leather insert with a stitching a la LG G4.

The name of the manufacturer is engraved on the side. Two torx screws hold the metal frame.

The opposite side is completely analogous to the previous one, only here is the engraving of the name of the device.

On top is a solid steel connector with a brass or gold-plated spring-loaded pin. It did not succeed in deforming it with various atoms. Connector platform can accommodate an atomizer, probably of any diameter.

Nearby is a microUSB-port for firmware device. It is covered with a silicone plug and a metal cover, which is fixed with two torx screws. Screwdriver in the set did not come up. Built-in charging is not. Although, with such a hemorrhoids access to the microUSB-port it is there to see it and would not want to.

At the bottom of the box, the battery compartment cover.

To extract it, you need to raise the lamb and, in fact, unscrew it.

On the inside of the lid there is an o-ring.

Threads of high quality. Problems with twisting / unwinding, as it happens in the modes with a similar solution, no.

Inside the compartment, mark the correct location of the battery.

Eats Aegis either from one battery 26650, or from 18650 with the help of a complete adapter.

Geekvape Aegis 100W TC Box Mod
Card Features
Power Rating: 100W
Max. Voltage: 9V ± 0.1V
Operating temperature range: -40 ° C to 80 ° C
Battery discharge up to 3.3V ± 0.1V
Thermal control on nickel, steel, titanium and TCR
Supported resistance range: Power and Bypass – 0.05 – 3 Ω / TC-NI – 0.05 – 0.8 Ω / TC-SS – 0.05 – 1.65 Ω / TC-TI – 0.05 – 1.1 Ω
Temperature range in TC mode: 100 ° C – 300 ° C / 200 ° F – 600 ° F

Earlier I did not encounter boxmodes from Geekvape and the first acquaintance left a positive impression. I did not see any flaws in the quality of the work. According to the manufacturer, the delay is minuscule 0.015 seconds. Whether it triggers autosuggestion, whether the start of the roast is really instant. Unfortunately, the board does not have a wide range of options. Navigation in the menu is convenient. By pressing the “Fire” three times, the modes change, and once – change the parameters. From the third-party settings, only the brightness adjustment of the display is available and the “±” buttons are locked. And about the modes, of which 7, now briefly tell.

Power – varivatt. The screen displays power, battery indicator, resistance, current strength, voltage and number of puffs / time of the last tightening. In the varivatta device without problems copes with the winding of 0.09 Ohm. The resistance of the coil changes only during tightening. On DNA, for example, that in idle time, that at the moment of tightening, the actual resistance of the build is always displayed. You can lock it and reset it, after which the mod will fix the current resistance. Cut-off after 10 seconds.
TC-NI / TC-SS / TC-TI – Thermal control on nickel, steel and titanium. The same settings are available as in the previous mode. You can not adjust the TCR.
TCR – and here already the temperature coefficient is adjusted.
VPC – heating curve. Available 5 divisions in 1 second increments. During tightening, the point on the graph moves in accordance with the previously set power. The transition from one division to another is smooth.
Bypass – Mehmode mode. You can also lock and drop resistance.

Crash test

Geekvape Aegis Box mod, as you already read in the cap, is protected by the standards of MIL STD 810G-516.6 and IP67, which means resistance to short-term immersion in water, protection against ingress of dust into the body and painless drops from a small height without any consequences. The warranty does not cover internal failures due to the user’s fault, so do not disassemble it without special need. The network already has a huge variety of all kinds of bullying over this device. That in liquid nitrogen is dipped, then the machine moves. Honestly, it’s not that much and I want to sway in the trash of the modes, so I will limit myself to water procedures and falls at home.
Let’s start with the test with water. He put it for 20 minutes in the basin. This will be enough to check how it behaves in the rain, when falling in a puddle, a fountain or other not deep accumulations of water. The battery is inside, the device is turned on.

At the end of the bath we observe an unpleasant picture – the water got into the interior, but this did not affect the working capacity. In the battery compartment nothing stranger penetrated.

Analysis of Geekvape Aegis Mod occupation is not simple. The glossy panel is held on a double-sided tape. Fears were in vain – a drop of water accumulated on a protective plastic plate.

Go ahead. This plate is in turn fastened to a silicone sealant. It tore even harder. There are no traces of moisture on the board. It can be concluded that the presence of water under the front panel is not a verdict. The more often in attacks of paranoia will disassemble the mode after immersion in water, the higher the probability of depressurization of the shell.

After that, he dropped a dozen times, imitating the various situations in which this is possible. There are no deformations on the body of the tracks. Yes, laminate is not asphalt, but on the same crash tests from the network of deplorable consequences, too, was not.

Comparison of dimensions and fitting

Snowwolf 200C, Geekvape Aegis, LostVape Therion 166.

IJOY Combro RDTA II, VGOD RDTA RII, SMOK TFV8 Big Baby.

Geekvape Aegis 100W TC Box Mod
Conclusion
Pros:
Protection against falls, dust and water
Quality board
Brutal appearance in the compartment with comfortable ergonomics
Use with batteries 26650 and 18650
The solid connector. It is able to place almost any atoms on itself.

Minuses:
Not the most ideal assembly
Rubber inserts are instantly spoiled
Lack of charging through box-box
Water can still penetrate into the body

In the previous review from greed811 boxmode, after getting moisture, did not turn on. I did not have such a problem. Because we are dealing with the miracle of the Chinese industry and everyone is familiar with their floating manufacturing quality, do not put grandiose hopes that this device will survive 100%. A certain share of the probability of a lamentable outcome is still present. However, despite this, there are simply no alternatives to Aegis. With it, you can go fishing, hunting, dusty plant / garage, camping, and any other place without fear of dropping it into the water, dirt, on the asphalt or trite not to worry about the leaked liquid from the atom. We can only hope that the trend for the protected devices will be picked up by all manufacturers and this will be an integral part of each new product. Rusty is where. For example, to rid the microUSB port of a ton of stubs in the same way as in smartphones.
Thanks to all.

The Geekvape Aegis Mod is provided for writing a review by the store. The review was published in accordance with paragraph 18 of the Site Rules.

Best Seller:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
smoant charon ts 218w

Powerful and Stylish – SMOK ProColor 225W TC Starter Kit

SMOK comes back again with the Smok ProColor 225w Kit! With cutting edge vaping technology, the Smok Procolor 225W kit offers all the standard features of high-end SMOK devices, which makes itself in the spotlight. It has a multi-color light band accentuating the beautiful high definition 1.3 inch color display. This band can be totally customized achieve a wide spectrum of color options. Users have the ability to change LED color between 12 options as well as setting the light style and light up frequency, which ensures complete modification in the users hands. Ergonomic in shape and button placement, the Procolor features Smok’s signature lateral fire key to achieve an effortless vaping experience. It is powered by two 18650 batteries (batteries not included) which can easily be replaced via the latched bottom battery access panel. Firmware update compatibility has been fused into the hardware of the unit so users can always keep their software up to date through micro USB, where batteries can also be charged. Not only does the Smok Procolor 225w make use of flashy features, it is also a high wattage monster, clocking in at a staggering 225W, as well as many temperature control settings for the utmost precision. Finished with a high quality paint finish accented body and a carbon fiber accented back cover, the Procolor is the pinnacle of high-caliber high wattage units with exceptional precision and versatility.

SMOK ProColor 225W TC Starter Kit

Included in the Full Kit there is the TFV8 Big Baby Beast Sub-Ohm tank. It is the best companion to pair with the ProColor Mod. Based on the initial design of the TFV4, the TFV8 Big Baby has all of the features and embraces them tenfold. The upgraded airflow, coil system, tank filling, and tank capacity are all just as good as the full size TFV8. Featuring large dual cyclops adjustable airflow, this tank allows you to tune the air freely until you find that suitable spot. The diameter in center chimney has also been enlarged to allow more air to go through the tank for the least air restriction. While the swivel top fill feature remains generally the same, the fill port size has increased for easier filling and less juicy mess. The TFV8 offers high-performance sub-ohm vaping in higher wattages with both the dual-coil V8 Baby-Q2 and the octo-coil V8 Baby-T8.

SMOK continues to make innovation on their designs with the powerful and stylish SMOK ProColor 225W TC Starter Kit. If you have interests, go on Urvapin for a good deal.

Best Recommend:
electronic cigarette
vaporesso swag kit
Hangsen Genesis
smok priv one kit

SnowWolf Vfeng 230W Kit

The SnowWolf Vfeng 230W Starter Kit is a high-powered device release that is capable of 230W of pure vaping power. Its design feeling comes from Mechanical shape robot. The modern and futuristic design incorporates a large 1.30〞TFT screen that has a changeable LED setting for added customization. The Vfeng 230W is powered by dual High drain 18650 and the maximum out of 230W. The durable, zinc alloy chassis measures 46mm x 34mm x 87mm and houses two, 18650 batteries that can be charged within the unit for added convenience.The kit is completed with a 24mm, 3 mL capacity tank atomizer that is designed to be complimentary to the mod itself and is capable of supporting top power outputs. The SnowWolf Vfeng 230W Starter Kit is available in three stunning colors. It will bring you scientific and technological vaping experience.
SnowWolf Vfeng 230W Kit

Features & Spec:
Main material:Zinc alloy+SS
Display:1.30〞TFT color screen
Wattage range:10W-230W
Temperature range:100℃-300℃/200℉-570℉
Voltage input:6.4V-8.4V
Voltage output:1.0V-7.5V
Max output current:40A
Battery support: 2*18650
Modes:POWER/SS(304/316/317)/Til/Ni200/TCR
Resistance range:0.05Ω-3.0Ω
Coil supporting:Kanthal/Titanium/Ni200/SS(304/316/317)/TCR
Charging support (USB):DC 5V/2.5A
Support USB charging

Package:
1 * SnowWolf Vfeng Mod(no battery cell)
1 * SnowWolf Vfeng Atomizer
1 * Glass Tube
1 * RBA Coil
1 * USB Cable
1 * Manual and Warranty Card

The SnowWolf Vfeng 230W Kit is recognized for its elegance, power and performance. So it is a top-tier premiere vape device, offered at an affordable price. This full vape setup SnowWolf Vfeng 230W Kit and SnowWolf Vfeng 230W Box Mod is now available for pre-order at Urvapin. We provide a great price for a mod in this category. If you have interests, please don’t hesitate to contact us.

Strong Recommend:
electronic cigarette
iJoy Captain PD270
Smoant Charon TS 218W
tesla terminator

Sigelei MT 220W kit with revolvr tank

We have to admit that most of us love the futuristic concept Sigelei MT 220W very much as its “cage” factor look, Led lights and practical applications. It’s not for fans of minimalistic designs! This is an attention grabbing, sci-fi looking mod with 220 watts of power and up to 570F of heat for TC. Following the Kaos Spectrum and the Vfeng Snow Wolf, it is “all in” on the LED lights. It has 4 color options for the mod frame, each of which have contrasting colors with the two battery tubes. As for the function, the stainless steel battery tube is quality built. The fire button is shaped like the transformer logo with 2 LED “eyes”. The Sigelei Revolvr is packed with the perfect punch of flavor, while still achieving peak cloud production. Additionally, the Revolvr is designed with a spacious top-fill refill system with enough space for any juice dispensing system. The transparent front panel makes it very easy to see the inside board, especially when the LED lights up. It also makes a visual impact on people. Besides, the super heat dissipation function and simple operation make Sigelei MT 220W more appropriate and enjoyable for your vaping experience.

sigelei mt kit

Sigelei MT 220W kit with revolvr tank Features & Spec:
Material: zinc alloy + stainless steel
Screen: 1.0〞TFT color screen
Wattage range: 10W-220W
Temperature range: 100℃-300℃/200℉-570℉
Voltage input: 6.4V-8.4V
Voltage output: 1.0V-7.5V
Maximum current: 38A
Support battery model: 2*18650
Working modes : POWER/SS316/SS317/TiI/NI200/TCR
Resistance range: 0.05Ω-3.0Ω
Coils supporting: Nickel chrome / stainless steel 316 / stainless steel 317 / nickel 200 / TCR / titanium
Support USB charging :DC 5V/2.5A
Transparent front panel, easy to see the inside components especially when the LED lights up
Fire button comes with 2 red LED lights
Exposed stainless steel battery tube brings visual impact
Built-in customized adjustable LED lights

Sigelei MT 220W kit with revolvr tank Package:
1 * Sigelei MT Mod (Battery not included)
1 * Revolvr Tank
1 * USB Cable
1 * User Manual
1 * Guarantee Card

Sigelei MT 220W kit with revolvr tank is available for pre-order now on Urvapin.

Strong Recommend:

buy electronic cigarette online
ijoy Genie PD270
wismec rx gen3
SMOK 220W OSUB King Mod

Sigelei Compak F1 Kit

The Sigelei Compak F1 Kit is an all-in-one setup features a 40W output, a 2ml tank capacity, LED indicators, e-liquid windows and an integrated battery with fast micro USB charging. This is a small, AIO vape setup that combines a durable zinc alloy chassis with a 2000 mAh battery for a top vaping performance in the lower wattage outputs.

With dimensions of just 28mm x 54.5mm x 90.50mm, this Sigelei Compak F1 Kit can be easily stored in a purse and is pocket friendly. Available colors for this kit include silver/black, red/black, white/black and all black. The chassis is made from zinc alloy and a rubber-oil firing button/grip results in ideal ergonomics. An internal tank has a 2ml e-juice capacity, is easily refilled and its e-liquid level can be monitored via convenient viewing windows. The atomizer/tank are easily removed for replacement and are made with durable materials. There’s also a dust cap stored on the bottom of the kit for cleaning and to ensure maximum hygiene.

An internal battery with a 2000mAh capacity for long vaping times powers the Compak F1. The built-in cell is recharged via a micro USB port that features a quick 2A current to quickly finish the charging process.

The Sigelei Compak F1 Kit works in power mode and has a maximum output of 40 watts, a maximum input voltage of 4.2 volts and fires with a resistance of 0.3ohm. An LED indicator light is used to monitor battery levels and also lights up during mod use.

Sigelei Compak F1 Kit
Features and Specifications
Measurements: 28mm x 54.5mm x 90.50mm
Made from zinc alloy
Rubber oil grip/fire button
Ergonomic and easily transported
Oversized fire button
Colors: white/black, black, red/black, silver/black
Dust cap to keep clean
Easy atomizer/tank replacement
Tank capacity: 2ml
E-liquid viewing windows
LED indicator light
Internal 2000mAh battery
Micro USB fast charging at 2A/5V
Operating modes: power
Power mode output range: 25W to 40W
Input voltage range: 3.2V to 4.2V
Replacement coil included
USB cable included
User manual
Warranty card

Great for on the go use or for the beginner vaper, this small sized, light weight Sigelei Compak F1 Kit is fantastic for traveling! Hurry up! Go on Urvapin to preorder one now!

Related Recommend:
cheap vape deals
smok t priv
wismec rx gen3
SMOK Stick X8 Kit

SMOK GX350

SMOK has been in the industry for many years delivering some of the best quality and renowned mods to the market and this time, it is proud to offer SMOK GX 350, which is gaining popularity due to its 4 battery configuration, extreme versatility, and incomparable design high wattage output. If you like to know more about SMOK GX 350, read below.

Available in four various color options, all of these have a zinc alloy construction. SMOK GX 350 provides an incomparable vaping experience. It features an ergonomic design, innovative firing button, compact design, and classy carbon fiber inlay. It has also a massive OLED display screen, a latched bottom compartment for batteries, and a USB port for firmware upgrades in the future. This kit may be powered by 2 or 4 18650 batteries that you need to buy separately from the kit. Once powered by 2 batteries, it may reach 220W of power while with 4 batteries, you can boost it to 350W of power.

smok gx350
Just like majority of mods in the market today, SMOK GX 350 also offers temperature control options, which enable you to range from 200 to 600 degrees. Some renowned features of SMOK GX 350 includes short-circuit protection, puff monitoring system, low battery warning, overheating protection, and twelve second cut off.

SMOK GX 350 has an elegant, ergonomic design with contours that makes this perfect. Its solid and compact nature makes this unparalleled. No mod device looks much better compared to SMOK GX 350. It also has a variable wattage that starts from 6W-350W. This exceptional range of power output provides users an excellent vaping experience without resistance that is frequently encountered with the premade coil head.
smok gx350
The device’s temperature control is extremely accurate. Some temperature features include temperature sensor and temperature limiting options. This allows the user to customize the vapor’s temperature, permitting cooler or warmer clouds of vapor, depending on your personal preferences. If the temperature control is your main consideration when purchasing vape mods, SMOK GX 350 will offer you better experience without scorching and dry hits. Its TFV8 tank perfectly fits the device and this is a much better option compared to TFV4 tank.

Best Seller:
Cheaping Vape Deals
osub 80w baby
asvape michael mod
snowwolf vfeng

All-In-One Device – iJoy RDTA Box

An all-in-one vaping device, iJoy RDTA Box is designed by Chinese manufacturer iJoy. It features a massive 12.8 ml e-liquid tank, 200W maximum power output, interchangeable RDA build decks, as well as temperature control and various other advanced functions. iJoy RDTA box is definitely one of the most interesting devices to come out this year. And the iJoy RDTA Box 200W is just as good as it sounds.

ijoy rdta box
The first thing that really catches attention is that the iJoy RDTA Box was the involvement of VapingWithTwisted420 in the design process. Not only is this guy hands-down the most hilarious vape mod reviewer on YouTube, but he also knows a thing or two about vaping devices. I personally think that taking into consideration the input of prominent figures from within the vaping community, who actually know what the community wants, is a stroke of genius, so praise to iJoy for making it happen. If the RDTA Box turns out to be a hit – and I suspect it will – we’ll probably see such collaborations in the future, and that’s something I’m very excited about.
ijoy rdta box
The iJoy RDTA Box comes in a large red-and-white cardboard box featuring all the necessary information and warnings. The kit contains the RDTA BOX mod, a disposable pre-made coil – the same one that comes with the iJoy Combo RDTA– a removable Velocity-style build deck, a USB cable (for updates only), a 510 drip tip adapter, a goody bag (Clapton coils, some cotton, spare o-rings and screws), a Phillips head screwdriver, a small plastic brush (probably for fluffing up the cotton), two silicone covers, and a user manual. As you can see, the iJoy RDTA Box comes with plenty of accessories, some of which I haven’t even seen before. How intimate and meticulous the package is! If you are attracted by the iJoy RDTA, please go on Urvapin for it.

Best Seller:
electronic cigarette
ijoy captain pd270
smok stick v8
tesla terminator

Vapeman STEAM ENGINE 75w Box Mod review

The Vapeman STEAM ENGINE 75w Box Mod is the newest Evolv DNA 75 portable box mod powered by a dual 18650 cells for long vaping times. It is Vapeman’s flagship entry into the box mod category and boasts a unique design and a powerful chipset that is sure to cement its popularity with the masses. The device also features precise temperature control operation, Escribe compatibility and an amazing steampunk style design.

vapeman steam engine box mod
With dimensions of 63mm x 28mm x 85mm, this unit is quite portable. The design looks to be vintage steampunk and is premium thanks to high quality brown (red wine) leather throughout with metal accents surrounding the fire button and adjustment buttons. Each mod also has its own serial number located on the 510 connector at the top.

The Vapeman STEAM ENGINE 75w Box Mod utilizes dual 18650 batteries that are bottom loaded by removing a sliding battery panel. A micro USB balanced charging system means you never have to remove the cells to safely top them off. The USB port is also used for firmware upgrades or to communicate with Escribe software on your computer which allows for easy mod configuration or to save your favorite settings in your unit’s memory slots.

Because of the Evolv DNA 75 chip set, the Vapeman Steam Engine features 75 watts of output, patented temperature protection, preheating functionality, temperature control with nickel, titanium, stainless steel and low atomizer resistance of just .15ohm in temperature mode or .25ohm in variable wattage mode.

vapeman steam engine box mod
The package comes with one Vapeman STEAM ENGINE 75w Box Mod, one Charging Cable and one User Manual.

Owing such a humanized box mod – Vapeman STEAM ENGINE 75w Box Mod is so cool. Be the envy of all of your friends and pre-order yours today from Urvapin.

Best Seller:
buy electronic cigarette online
tesla 120w box mod
Coil Master DIY Kit V3
Smok Vape Pen 22