Eleaf iJust 3 Kit

The Eleaf iJust 3 Kit is the upgrade version outstanding in iJust Family. The cool and gorgeous Kit features a compact size. It is very easy to carry in pocket and comfortable to hold in hand. With iJust 3 battery inside and 6.5ml Ello Duro Sub Ohm tank, the kit offers long time vaping. It consists of iJust 3 battery and Ello Duro Sub Ohm tank. Powered by the built-in 3000mAh battery, the Eleaf iJust 3 Kit is capable of firing up to 80 watts. The LED Indicates Battery Level by four colors. You can easily check the battery level by looking at the color of the LED. The side charging port makes charging the device easy when it stands on the table.


The Eleaf Ello Duro sub ohm tank adopts Bulb Pyrex Glass Tube, which has a enlarge juice capacity(up to 6.5ml). The bottom airflow system is designed for good flavor. To fill the ELLO Duro tank is a easy thing. Just slide the drip tip back and it reveals the fill port, then you can fill the tank. Equipped with newest Net Coil(HW-N 0.2ohm) and Multi-hole Coil(HW-M 0.15ohm Coil) systems, this Eleaf iJust 3 Kit provides nice flavor and large vapor.

The Eleaf iJust 3 Kit presents six gorgeous colors (red, black, purple, silver, dazzling, blue) with three different patterns for your selection. The circuit protection system helps avoid over-charging, over-current and over-discharging. Every detail on the Eleaf iJust 3 Kit is engineered elaborately.

The Eleaf iJust 3 Kit includes one iJust 3 Battery, one ELLO Duro Atomizer (6.5ml / 2ml), one HW-N 0.2ohm Head, one HW-M 0.15ohm Head, one USB Cable, two User Manuals and oneSet of Spare Parts. It is now available on Urvapin. Go and buy one to enjoy!

E-cigarette Brand Recommend:
Aspire Vape
Limitless Vape
Coil Art Vape
Tesla Vape

Smok Stick V8 Kit with Eleaf Basal 30W Mod

The Smok Stick V8 Kit pairs the big baby beast with a 3000mah battery mod. Delivering a stable easy to use mod set up. No dialing up or down of watts, simply unpack, fill with juice and its ready to vape. The Big Baby Beast Tank is a monster of a sub ohm tank that is not paired up with a tubular mod that is the sleekest

SMOK TFV8 Big Baby Beast Tank Features:
Enlarged Edition of the Baby Beast
24.5mm Diameter
5mL Juice Capacity
Superior Stainless Steel Construction
High-Grade Glass Reinforcement
Convenient Top-Fill Design with Hinge Lock
Dual Adjustable Airflow Control at Base
Black Delrin Ultra-Wide Drip Tip
0.15ohm V8 Baby-M2 Dual Coil
0.25ohm V8 Baby-M2 Dual Coil
510 Connection

SMOK Stick V8 Battery Mod Features:
24.5mm Diameter
75mm Height
Integrated 3000mAh Battery
Direct Voltage Output System
Operating Voltage Range: 3.4-4.2V
Single Button Operation
Intelligent Battery Life Indicator
8 Seconds Protection
Low Resistance Protection
Short Circuit Protection
Low Voltage Protection
Micro Usb Charging Port – Pass-through Capability
510 Connection

Includes:
1 Stick V8 Battery
1 TFV8 Big Baby Beast Tank
1 0.15ohm V8 Baby-M2 Dual Core
1 0.25ohm V8 Baby-M2 Dual Core
1 Micro Usb Cable
Spare Parts and O-Rings
Instructional Manual

Breaking away from the norm, Eleaf BASAL 30W MOD boasts a remarkably compact profile and an extraordinary visual appeal. Its all-metallic finishes are both beautiful and durable. Equipped with a 1500mAh internal battery, the BASAL is capable of outputting 30 watts and has 2A charging for quick and efficient recharging. Compact, stylish and easy-to-use, the BASAL is a great vaping mod for vapers on the go or simply looking for a backup.

Brand: Eleaf
Unit: 1 set
Colors: Brushed Silver, Rose Gold, Gold
Size: 36.6mm*15.0mm*76.6mm
Battery capacity: 1500mAh
Maximum charging current: 2A
Thread type: 510 thread
Output wattage: 1-30W
Output mode: VW
Resistance range: 0.6-3.0ohm
Shipping weight: g

Each set contain:
1pc BASAL
1pc QC USB Cable
1pc User Manual

E-cigarette Brand Recommend:
Aspire Vape
Limitless Vape
Coil Art Vape
Tesla Vape

Eleaf iStick Pico 25 85W TC Starter Kit

The Eleaf iStick Pico 25 85W TC Starter Kit is a compact single 18650 (sold separately) powered box mod paired with the Eleaf Ello 25mm Sub-Ohm Tank. The iStick Pico 25 features a three piece body design, a 85W chipset with full TC support, and fits atomizers up to 25mm in diameter. The Ello 25mm Sub-Ohm Tank features an expandable tank section, allowing users to use the compact size for 2ml capacity or the extended size for 4ml capacity; a sliding top fill system; two different drip tips; and uses the HW series coils.

iStick Pico 25 85W TC Features:
1 to 85W Power Output
0.1 to 3.5 ohm Atomizer Resistance Range
Bypass Mode Feature
Firmware Upgradeable
Full Temperature Control Output
Ni200 Nickel Support
Titanium Support
Stainless Steel Support
Three Memory TCR Mode
Set Own Temperature Coefficient of Resistance
Fine Tune Output
0.05 to 1.5 ohm Atomizer Resistance Range
200 to 600 degrees Fahrenheit Range
Ultra Compact Form Factor
48mm by 25mm by 70mm
0.91″ OLED Screen
Battery Life Indicator
Output Wattage/Temperature
Output Amps
Atomizer Resistance
Single 18650 Powered
Top Loaded
Battery Not Included
Micro USB Charge Port
2A Max
Three Button Operation
Oversized Firing Button
Bottom Button Adjustment
Spring Loaded 510 Connection

Product Includes:
One iStick Pico 25 85W TC Box Mod
One Ello Sub-Ohm Tank
One HW1 0.2 ohm Coil
One HW2 0.3 ohm Coil
One 4ml Glass Segment
One Chimney Extension
Micro USB Charging Cable
User Manuals

The iStick Pico 25 85W TC Starter Kit, with its compact and stylish design, convenient retractable top fill Ello 25mm Sub-Ohm Tank, and upgradable firmware, makes this kit a great choice for all vapers. If you want to buy one, you can look for it on urvapin.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

85W iStick Pico 25 box mod

The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.
With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W. The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.

The iStick Pico 25 can handle various tanks up to 25mm diameter. With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much more quickly. The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you. Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest. The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging. The 18650 battery can be charged in the iStick Pico 25 through the side USB port via wall adapter or computer or charged with an external battery charger.

Eleaf 85W iStick Pico 25 box mod Features & Spec:
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes), 0.1-3.5ohm (VW mode)
Eleaf 85W iStick Pico 25 box mod Package:
1 * iStick Pico 25 (without battery)
1 * QC USB Cable
1 * User Manuals
Spare Parts

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Eleaf iStick Pico 25 Box Mod Starter Kit Preview

Coming soon from Eleaf is another in the now famous Pico line of very small, single 18650 cell, moderate wattage box mods and a sub-ohm tank. The sub-ohm tank this time is the ELLO Tank, with two coil heads included in the box.

The iStick Pico 25 features 0.91-inch screen with a bright and clear interface, 2A quick charge capability and its firmware upgradeable. It has the preheat function found in most Eleaf/Joyetech/WISMEC mods, but this time it’s in a compact PICO size package. Colors available will be Red/Black, Light Blue/White, Lime Green/White, and Stainless/Black.

The Eleaf iStick PICO 25 is powered by single 18650 battery, with a maximum power of 85W. The Kit comes with the ELLO Tank, but the mod itself can handle any tank up to 25mm diameter.

The ELLO atomizer features the new HW coil for supposedly good flavor, plus a retractable top cap for easy fill slots. For all intents and purposes, this is a throwback to the original Pico style box mod, with an upgraded chip, 85W of power, and a new, low resistant ELLO Sub-Ohm tank as a part of the kit.

Features of the iStick Pico 25:
Size: 25.0mm*48.0mm*104.0mm
Weight: 143.2g
E-liquid capacity: 2ml
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery
(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes)
0.1-3.5ohm (VW mode)

Eleaf iStick Pico 25 with ELLO Full Kit comes with
1x iStick Pico 25 (without battery)
1x ELLO Atomizer
1x HW1 Single-Cylinder 0.2ohm Head
1x HW2 Dual-Cylinder 0.3ohm Head
1X QC USB Cable
2x User Manuals
Spare Parts

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html

Eleaf iStick Pico 25 with ELLO Launching

Eleaf is so glad to introduce you an upgraded version of the popular iStick Pico, the iStick Pico 25.

The iStick Pico 25 adopts a big 0.91-inch screen, which offers the users a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is able to output a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.

 

Eleaf iStick Pico 25 use new interface for VW mode displays resistance of coil, wattage setting and battery bar more clearly, allowing you to have a check easily by a simple glance.

 

The Smart mode will save one output power setting for each resistance value and can totally save ten groups of such profiles. Once you change the output power setting for a resistance, it will re-save the changed setting automatically. When the Smart mode has already remembered ten profiles and you want to add another new resistance, the first saved profile will be deleted.

 

You can download or make logos to your preference and put the favorite one in the mod. The logo should be single color picture in the format of bmp with limited 96*16 pixel.

 

Steps on how to put logo in the mod:

a.Open the picture you chose with Paint, edit it to be a single color picture of 96*16 pixel, and save it in format of bmp.

b.Download the file on our website, plug the mod in with USB cable, and double click the EleafUpdate.exe.

c.Click “LOGO” and open the picture you saved, finally the custom logo is successfully put in the mod.

d.Press the fire button twice in quick succession when the mod is powered on to enter logo on/off interface and press up or down button one time to turn on or off logo.

e.When you turn on logo and the mod enters standby mode, the logo appears on the screen till the mod goes to sleep mode.

Best Seller:
https://www.urvapin.com/
https://www.urvapin.com/limitless-200w-tc-box-mod.html
https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html
https://www.urvapin.com/voopoo-drag-157w-tc-box-mod-resin-version.html
https://www.urvapin.com/arms-race-lmc-200w-dual-18650-box-mod.html