Hugo Vapor Rader Mage GT218 Mod Review

Hugo Vapor Rader Mage Intro

It’s rare to describe a vape mod as “light, loud and plasticky” and have it be a compliment. But that’s exactly what I’m doing here. Because the Hugo Vapor Rader Mage is all of those things. But it’s also a really well-performing, surprisingly high-end vape mod that manages to offer a solid experience without breaking anyone’s bank.

  • hugo_vapor_rader_mage_gt218_tc_box_mod_front_side

When you first remove the Rader Mage from its box, you’ll be shocked at how lightweightthe device actually is. Not only did my resin-colored test model feel feather-light, but I actually thought there was circuitry missing. Nope – it was all intact. But the wafer-thin exterior might make you wonder how durable the Rader Mage is for everyday use. (my first thoughts we, honestly, “Is this a 3D Printed Mod?”)

The same goes for the single-piece up/down control scheme, which is functional enough, but there isn’t enough responsiveness or accuracy to recommend the form factor. Here, a dual button setup would be a much better solution.Moving beyond the swirling, Van Gogh-esquepaint job, there are some other notable areas where it seems like costs were cut to reach a certain price point. For starters, the light aluminum-like fire key is very hollow and gives off a slight “clang” when used repeatedly.

On my test model, the front-facing USB charge and upgrade port was actually a little off-center, making it difficult to insert any of my 1,291 cables (give or take a few). This made me wary to move forward, since the build quality seemed haphazard at best, and shoddy at worst. Thankfully I soldiered on.

Finally, the squarish form factor helps the Rader Mage accommodate atomizers up to 28mm wide – a number that could be considerably higher if Hugo Vapor had seen fit to center the 510 connector. Instead, the offset connection pushes things slightly toward the front of the mod, for no real reason whatsoever.

One good point – the 510 connection itself is wonderful. Press fit for sure, but surprisingly solid, even when surrounded by the lightweight plastic body.

Feature Highlights of the Rader Mage Mod

By now, you probably think I didn’t like the Rader Mage. Or you scrolled to the end and realized I did. But in between the cheap-ish frame material lies a really solid vaping chipset, and a battery efficient device that will keep vapers puffing along for hours.

Also, though I didn’t love the fire key, the button IS very responsive (unlike the up/down controls) and the Rader Mage ramps up beautifully, all the way to its 218 watt maximum output. The device is also shockingly accurate for a mod at this price point, with readings matched only by my external resistance checker. Whether in wattage or temperature control modes, the Rader Mage is spot on – perfect for a newcomer trying advanced vaping for the first time.Though it’s a simplified interface, the Rader Mage’s monochrome OLED display is really well done. It might seem a little dense and busy, but there’s nothing missing that a vaper would need – everything is easily legible, and the linear menu trees make things easy to navigate, too.

One interesting highlight worth noting is the battery door, which seems like it’s held on by bubble gum and prayer, yet did an admirable job of staying put, even when moved in and out of a pocket. I also accidentally dropped it, and it stayed intact – but we’ll get to that in a minute.

Personal Observations of the Hugo Vapor Rader Mage

There are a lot of things to question about the Hugo Vapor Rader Mage, but there’s simply much more to like. When I first got the mod in my hands, I thought there was no way a powerful vape mod was buried inside this flimsy frame. But after installing a pair of fresh 18650s and firing it for the first time, I shut my mouth. Because the Rader Mage delivers.

Wattage mode was even better, with fast fluid controls, and smooth, reliable ramping no matter where you set your wattage. Unlike so many higher-wattage vape mods that seem to forget some people like lower wattage settings, the Rader Mage keeps performance accurate throughout.Using the straightforward menu system, I easily navigated through all available modes, and was thrilled by all of them. Temp control modes were a little cumbersome with the two-button control scheme, but coil detection and temperature were pinpoint accurate, and locking in resistances worked well with no odd menu problems.

Plus, battery performance is UNBELIEVABLE. I repeat, UNBELIEVABLE. I took this lightweight gem out for a long day trip and came back with more than 50% battery life remaining. And believe me, I wasn’t using it sparingly. Even above 150 watts, I didn’t see the usual precipitous drop in performance – just smooth sailing.

So, earlier I mentioned dropping the Rader Mage. I’m happy to report that a firm shot to a concrete sidewalk did NOT damage the rubberized paint job… too badly. Oh, it looked like it took a shot, for sure, with noticeable scuffing. But the device stayed intact, and worked like new afterwards. I wouldn’t make a habit of dropping the Rader Mage, but I wouldn’t panic about the lightweight construction, either.

Perhaps most important, the Rader Mage is just downright enjoyable to vape. From its soft, comfortable exterior, to its ergonomic shape and pure power, there’s a ton of things to like here, especially at this price point.

Wotofo Troll V2 Review

Wotofo Troll V2 RDA Silver & Black

Wotofo Troll V2 Intro

The Troll v2 is the latest RDA from Wotofo and the second iteration of the popular Troll RDA.  This time around, it comes with a Velocity-style deck instead of a split center-post, provides an alternate airflow configuration and has a massive juice well.  It’s a pretty simple and straightforward RDA and sometimes that is great.  Let’s see if it’s simplicity is a gift or a curse.

Wotofo Troll V2 Specs and Features

Kit Content

Specifications

Notable Remarks

Machining/Fit and Finish

Wotofo Troll V2 RDA Taken Apart

The machining on the Troll v2 is pretty good, certainly on par with other atomizers in this price range.  It’s nice to see that Wotofo has stepped up their machining to match the quality Vaping360 has seen from Geek Vape.  There are no burrs to be found and the atomizer doesn’t feel cheap in the hand.  Unlike some other Velocity-style decks in this price range, neither of the posts lean to the side and stand perfectly vertical as far my eye can tell.  The o-ring tolerances on the other hand are pretty tight making it pretty difficult to take the outer barrel and airflow controller out for re-dripping.  Fortunately, the included drip tips are wide enough to allow for easy dripping, but have your rubber gloves handy when it comes time to rebuild it, you’re going to need them.

Build Deck

Wotofo Troll V2 RDA Deck

The build deck is a typical Velocity-style two-post deck with large 2.7 mm post-holes.  Not much else to say here since we’ve all seen this deck around for quite some time, it has replaced most of the three-post and split center-post decks for the most part.

Focus On www.ave40.com For More Vape Tank.

Ease of Build

Wotofo Troll V2 RDA Airflow

As expected with any Velocity-style deck, it is very easy to build on and can fit some pretty large diameter wire since each lead has it’s own hole.  No lead bending is required since there are two holes oriented vertically in each post.  It really seems like the Velocity-style deck has become the new standard.  It goes without saying, but I definitely prefer this deck over the original’s split center-post deck.

Juice Well

Wotofo Troll V2 RDA Juice Well

The juice well is 10 mm deep and holds a ton of juice.  It eliminates the need for constant dripping and can be considered a drip-and-go atomizer.  In order to get my nicotine fix, I only need to drip twice per session which is pretty convenient.  The wide bore drip tips allow for such easy dripping that you can literally do it while walking.  As a matter of fact, I don’t even really drip, I just squirt an entire droppers worth of juice in it and call it good.  Be careful though, even though the juice well is deep and holds a lot, if you tilt your mod when it’s full, it will most likely leak.  On several occasions I had juice run down the side of my mod.

Airflow and Controller

Wotofo Troll V2 RDA Shaft-Airflow

The airflow controller is pretty straightforward but also provides a fair amount of options.  There are two diamond-shaped cutouts in the outer sleeve and the slots are cut into the inner sleeve.  You can choose between three offset horizontal slots or three diagonal slots and in each configuration, you can adjust the airflow by turning the top cap section which rotates the inner sleeve.  When you close down the diagonal slots, you can choose a setting anywhere between zero and three open slots.  When closing down the horizontal slots, there will always be three vertically-oriented slots offset in a diagonal fashion, but the length of each slot can be controlled.

The draw is smooth with plenty airflow.  Wide open, there is very little restriction and will satisfy almost every cloud chaser out there.  It can also be closed down for a restricted lung hit, but not enough to achieve what I would consider a mouth-to-lung draw.  That is fine though because this atomizer isn’t geared towards mouth-to-lung vapers.

Focus On www.ave40.com For More Vape Tank.

Aesthetics

Wotofo Troll V2 RDA Silver

This is definitely the worst part of this atomizer for me, I cannot stand that hideous troll face engraved on the side; it just looks ridiculous.  I know that is totally subjective, but if it didn’t have that engraving, I would’ve most likely bought one for myself had I not gotten it for free for this review.  Troll face aside, I think everything else looks pretty nice.  It’s tall, but not obnoxiously tall like the CLT4 RDA and the shorter stainless steel drip tip has the right width-to-height ratio to give it a nice proportional aesthetic.

Performance

Wotofo Troll V2 RDA DripTip Adapter

This is where this atomizer really gets me, I was not expecting it to perform this good.  Don’t get me wrong, the flavor isn’t on the same level as a high end atomizer with a small chamber and a tight draw, but for what it is, the flavor quality caught me off guard.  It’s not quite as good as the Tsunami, but it’s close.  I built it with the included twisted coils in a dual coil configuration with 6.5 spaced wraps around a 3mm screwdriver.  I placed the coils so they were as close to the airflow as possible and centered with the middle horizontal slot.  Firing this at 64 watts, the vape was dense and the flavor was certainly above average. I found the horizontal slots give off a little bit more flavor and the diagonal slots produce larger clouds.

Likes

  • Good flavor
  • Good vapor production
  • Easy to build
  • Deep juice well
  • Comes with a comfortable standard drip tip as well as chuff cap
  • Hybrid mod compatible center pin

Uwell Valyrian Sub Ohm Tank Review – An Exceptional Flavour Tank!

Introduction To The Valyrian by Uwell

Today we are looking at the Uwell Valyrian sub ohm tank. It is a 25mm diameter, 5ml capacity tank with a few tricks up its sleeve. It features a new top-filling system as well as some golden inner coil pins that allows the vaper to customise the airflow and flavour!

But how did I get on with it? Find out in my written and video review!

The Uwell Valyrian is available in 5 different finishes, each of which has two different colour drip tips and o-rings, for that extra matchy matchy action.

From the branding Game of Throne fans will recognise the Valyrian name as well as  the graphics on the outer packaging.Valyrian6As always my opinions are honest and my own.

Focus On www.urvapin.com For Best Vape Tanks.

What’s In The Box

Packaing for the Valyrian sub ohm tank by Uwell

  • Uwell Valyrian Sub-Ohm Tank
  • 2x 0.15 ohm Coils
  • 2x Extra Inner Coil Airflow Pins
  • Extra Drip Tip
  • Replacement Glass Tank Section
  • Spare Parts Pack
  • User Manual

    Valyrian2

Features

  • 25mm Diameter Base
  • 5.0ml Max Capacity (8ml glass can be purchased separately) + Available in 2ml TPD Version
  • Unique Interchangeable Pins
  • Precision Triple Adjustable Bottom Airflow
  • Stainless Steel Construction
  • Pyrex Glass
  • Stainless Steel 510 Threading
  • 24K Gold Plated Contact

Build Quality & Design

We’ll start from the top and make our way down the Tank…

The Drip Tip & Filling Port:

You get two drip tips in the pack, both identical, but with different colour rings on the base. They are conical and have a 510 sized base, so you can add your own if you wish, but I don’t think that this is necessary. They fit nicely in the mouth and don’t feel uncomfortable at all.Valyrian8

The filling ports are accessed by pressing a button near the top of the tank, this causes the top cap to unlatch and hinge on the opposite side. You are met with tow kidney shaped holes that are a great size for most bottles of e-liquid. Underneath the drip-tip you have a rubber grommet to prevent any leakage.Valyrian9

The Tank Section:

The tank section comprises of the glass, a chimney and the coil. The glass is a 25mm Pyrex tube for maximum durability. They also give you a spare, in the unlikely event that you end up cracking yours.Uwell Valyrian green tank

The coils included are both 0.15Ω vertical coils and have an operating wattage of 95-120w. Find out how I got on with the coils in the performance section below

Focus On www.urvapin.com For Best Vape Tanks.

The Airflow Base

So, the airflow control ring has three rather large slots in it, these are fully adjustable and allows masses of airflow to come through to the base of the coils. It has a stop at each end, so that it only rotates from fully open to fully closed, not all the way around.Valyrian10

On the base we have the usual Uwell markings as well as a gold plated 510 centre pin.Valyrian11

Included with the spares, you also have two metal pins which are shaped in a way that changes the airflow and flavour that you get from the tank, these simply pull out and press in. Once again, find out how I got on with these in the performance section below.Valyrian12

How Does the Uwell Valyrian Perform?

After using this tank for a few weeks, I feel that fully open airflow is far too much for my personal preference, so I will be vaping it at the following wattages with the airflow three quarters closed unless stated otherwise.

Using the 0.15Ω Coil at Different WattagesValyrian5

  • 95w: A flavoursome and cool vape, no dry hits and plenty of clouds
  • 110w: Again, a very flavoursome vape, getting slightly warmer now and the clouds are definitely chucking!
  • 120w: The flavour is starting to deminish and I’m getting a slightly dry hit, this happens at all airflow options for me. Definitely not a pleasurable vape at this wattage.

My Preferred Sweet Spot:

  • 80w: I have been vaping this below the suggested minimum wattage quite comfortably. With the airflow three quarters closed, it is an extremely pleasurable vaping experience. I think it offers maximum flavour at this wattage as well as being quite cool in temperature

Flavour & Clouds

Overall, the flavour and clouds on this tank has been very acceptable. Yes it diminishes towards the higher wattages, but vaping anywhere between 80w and 110w has been absolutely fine with me.

The Coil Airflow Pins

Included are two different coil airflow pins, these have been supplied to change the users vaping experience. Here’s what I felt that the pins do.

With the screw-shaped one, I found that it improved the flavour of menthol and fruit e-liquids. It just made them that bit more fruity and fresh!Valyrian3

With the bulb-shaped one, I found that it made the custard and cream flavours that bit more thicker and dense.Valyrian4

The Uwell Valyrian On Devices

Rev-Tech GTS:

Valyrian13
On The RevTech GTS

What I Like

The flavour on this tank is just exceptional. Usually with your low ohm tanks such as the Smok TF-series, you get lots of cloud and no flavour. With the Valyrian, you get the complete opposite. A hell of a lot of flavour as well as a decent amount of plumage.

The design of this tank as a whole is very good. It has been made to a decent quality compared to other sub ohm tanks on the market.

The pins. Although they are not something that I will be regularly using, when I did use them, the changes they made were noticable.

What I Dislike

There is honestly not much that I dislike about this tank, apart from the loss of flavour at 120w. Although this isn’t a wattage that I would usually vape at, some might.

Final Review Verdict

The Uwell Valyrian is an absolutely great stock coil tank. The flavour surpasses all its competitors and will I will definitely be using this a lot in the future!

Which brings me to the question, Would I buy the Uwell Valyrian tank If I lost or broke it???

HELL YES!

Pros:

  • Good looks
  • Great flavour
  • Smooth airflow

Cons:

  • Flavour lacks at high wattages

Now It’s Available :UWELL Valyrian Sub Ohm Tank

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

JustFog Minifit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

Tesla Terminator Kit

Vgod Pro Mech 2

Rincoe Ceto Kit

Smok I-Priv Kit

Lost Vape Orion Kit

Geekvape Alpha Sub Ohm Tank – and again the tank wrapped in resin

Again, the company Geekvape acquired a novelty. She became a regular nonslug. Probably, she was released after the new boxing fashion, which they are at their best at public relations on the pages of their social networks. And perhaps, it is intended for the future novelty, which we have to contemplate in the near future. 

Geekvape Alpha Sub Ohm Tank 
Geekvape Alpha Sub Ohm Tank -
Case material: stainless steel Atomiser 
type: maintenance-free 
Evaporators 0.15 / 0.4Ω 
Capacity: 4ml 
Diameter: 24mm landing (probably) 
Height: unknown 
Connector: 510, pin gold-plated 
Weight: unknown 
Color: see photo below 
Geekvape Alpha Sub Ohm Tank -
Package Contents
– Alpha Sub Ohm Tank 
– replaceable evaporators 2pcs MM * 1 0.15Ω / MM * 2 0.4Ω (one pre-installed) 
– spare orings 
– spare glass 
– user’s manual 

Our hero looks quite normal for a representative of the family of non-services, to which he refers. The upper and lower parts, as they are, are massive, both of which are decorated with resin materials. Proceeding from the coloring, we can conclude that he will still get in the kit to the flagship of the manufacturer – boxing mode Novo. 
Geekvape Alpha Sub Ohm Tank -

Focus On www.ave40.com For More Vape Devices.

The developers offer from the start only two colors. Somehow it does not even look like their corporate style, although the official presentation has not taken place yet and maybe later they will announce a more diverse line of colors.
Geekvape Alpha Sub Ohm Tank -
Drip type 810th, it is also made of resin. Its coloring echoes the overall decoration of the tank.
Geekvape Alpha Sub Ohm Tank -
Geekvape Alpha Sub Ohm Tank -
Seated drip type in the lid. The opening mechanism is sliding, and first it will be necessary to press the special button. The filling hole is only one, the size is decent. It is almost not drowned below the deck’s sides, therefore, closing the lid, you will certainly sweep all the liquid drops that have not got inside the tank.
Geekvape Alpha Sub Ohm Tank -

Focus On www.ave40.com For More Vape Devices.

Capacity is not the biggest, moreover it is also installed by bubble glass. As I understand it, the spare glass in the box is exactly the same in capacity.
Geekvape Alpha Sub Ohm Tank -
Our hero feeds on removable evaporators. In total, there are two types, both on a grid. Nalivat such can certainly.
Geekvape Alpha Sub Ohm Tank -
The air intake adjustment is realized in the classical way – the swivel ring in the base of the atomizer. It is executed, by the way, also from resin. Air intake holes, by the way, a small size, even somehow strange.
Geekvape Alpha Sub Ohm Tank -

Focus On www.ave40.com For More Vape Devices.

Pin is gilded and performs decently.
Geekvape Alpha Sub Ohm Tank -
Geekvape Alpha Sub Ohm Tank -

Now It’s Available :Geekvape Alpha Sub Ohm Tank

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

JustFog Minifit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

Tesla Terminator Kit

Vgod Pro Mech 2

Rincoe Ceto Kit

Smok I-Priv Kit

 

Snowwolf Mini 100W box mod – called a mini, but in fact

Again, snow wolves tear their claws, flying at full speed into our news column with their next creation. Just yesterday, I introduced you to their new squonker – Snowwolf O-100 Squonk Mod . Today we have an adjustable boxing mod on the agenda. 

The name he received is the following – Snowwolf Mini 100W box mod . 
Snowwolf Mini 100W box mod - called a mini, but in fact ...
Naturally, the information producer does not really give, and when there will be an official release, it is not known. We have several photos (renders) and a handful of information. I want to immediately report – at the moment the device is positioned for sale with an unattended tank, and if you know something about fashion, then the atomizer is completely zero. Therefore, as soon as anything is known, I will tell you, but for now, we are looking. 

Dimensions: 81.3 x 54 x 30.5mm
Weight: unknown
Housing material: zinc alloy + plastic
Power: 1 x 18650/1 x 20700/1 x 21700 (veronio)
Output power: 10 – 100W
Operating mode: POWER, TC (NI200, SS, TI), TCR
Temperature range: 200 ℉ – 600 ℉ / 100 – – 315 ℃
Supported resistance: 0.05 – 3.0Ω
Protection: against low / high resistance, overheating, short circuit, reverse polarity, overcharge / overdischarge
Connector type: steel 510, gold-plated, spring-loaded
Screen / Diagonal: yes
Micro-USB port / charging: yes, charging current 2.5A
Color:see photo in the course of the article 

Packing (probable) 
– Mini 100W box mod 
– USB cable 
– adapter for 18650 batteries 
– user manual 
– warranty card 

Focus On www.urvapin.com For More Vape Start Kit.

Again we are welcomed by the design that we saw yesterday. And the truth is, the design is very similar – the same 3D logo of the manufacturer, looking at its owner with one of the side panels. But they decided to hang a background with a plastic insert in the style of honeymomb. More developers decided to play in contrast, shading some of the elements with a dark color.
Snowwolf Mini 100W box mod - called a mini, but in fact ...
To admit, first, when I saw the cover’s design, I thought that the wolves started to conquer the vertices of compactness. But later, having learned the overall dimensions, I realized that this was not the case at all. For example, the similar size has an extreme novelty from Elix – Pico Piconer , but there in the case fit control chipset, exactly the same battery and still a bottle for liquid. And here only the first two elements. Despite this, ergonomics is normal, true, for a two-battery)))
Snowwolf Mini 100W box mod - called a mini, but in fact ...
The control panel is standard – a large fire button, a small, but quite informative display, and two control buttons. The connector for charging the battery immediately, at the very bottom.
Snowwolf Mini 100W box mod - called a mini, but in fact ...

Focus On www.urvapin.com For More Vape Start Kit.

The design of the battery cover, a la pico – screw cover on the upper end of the mod.

The performance is decent, apparently, inside the device works the same control chipset as on the aforementioned squonkers.
Snowwolf Mini 100W box mod - called a mini, but in fact ...

Now It’s Available :Sigelei Snowwolf Mini 100w Kit

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

JustFog Minifit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

Tesla Terminator Kit

Vgod Pro Mech 2

Rincoe Ceto Kit

Smok I-Priv Kit

Lost Vape Orion Kit

Sigelei Sibra E2 Kit – familiar to pain design

And the new Sigelei, and again the snake theme. Eh, the developers have something to boast about … 

By the way, this is the third set in such a design. This topic is either attracted to users, or designers thus arrange a vacation to their brains in the summer. Nevertheless, we will get acquainted with yet another low-powered set. 

Sigelei Sibra E2 Kit 
Sigelei Sibra E2 Kit - familiar to pain design ...
Dimensions: 85.5 x 35.5 x 25.5mm 
Weight: unknown 
Housing material: zinc alloy + plastic 
Power supply: 1 x 18650 
Output power: 10 – 80W 
Voltage range: 1.0 – 7.5V Operation 
mode: POWER, TC (NI200, SS , TI) 
Temperature range: 200 ℉ – 600 ℉ / 100 ℃ – 315 ℃
Supported resistance: 0.05 – 3.0Ω
Protection: low / high resistance, overheating, short circuit, reverse polarity, recharge / overdischarge
Connector type: steel 510, pin gold-plated, spring-loaded
Screen / diagonal: yes, 0.91 “
Micro- USB port / charging: yes, charging current 2A
Color: see photo below
Sigelei Sibra E2 Kit - familiar to pain design ...

Focus On www.ave40.com For More Vape Kits.

Package (likely)
– Sibra E2 mod
– Tank
– spare parts
– USB cable
– user manual
– warranty card

Our hero looks immodest, even provocative. All this is due to its “flashy” coloring. In general, the form factor is quite good, in the palm of your hand this should fit comfortably. For these purposes, a plastic insert, possibly a soft-touch, is added to the back side.
Sigelei Sibra E2 Kit - familiar to pain design ...
With the color palette everything is fine.
Sigelei Sibra E2 Kit - familiar to pain design ...
With a complete tank, nothing is clear. On the official website there is no information, and on the pages of the social networks of the fashion there is then an extreme 120 munshot, then with some other unskilled, naturally, painted body.
Sigelei Sibra E2 Kit - familiar to pain design ...
The control panel is standard – a large faceted fire button, a small display, two control buttons and a connector for charging the battery. The charging current, by the way, is good.
Sigelei Sibra E2 Kit - familiar to pain design ...
The battery compartment has not yet been shown to us, it probably hides behind a removable panel that occupies the entire rear of the device. The device is powered by a single 18650 battery. The
Sigelei Sibra E2 Kit - familiar to pain design ...

Focus On www.ave40.com For More Vape Kits.

performance for a single-pot is standard, the minimum functional set on board is present.
Sigelei Sibra E2 Kit - familiar to pain design ...
More and nothing to add. Another regular dialer, which on the shelves of stores abound.
Sigelei Sibra E2 Kit - familiar to pain design ...
The price is still unknown, the release has not taken place yet …
Sigelei Sibra E2 Kit - familiar to pain design ...

Now It’s Available :Sigelei Sibra E2 80W Kit with Sobra Mini Tank 5.5ml

Hot Sale Recommendation:

Voopoo Panda

Hellvape Drop Dead RDA

Hellvape Dead Rabbit RTA

Vaporessso Polar Kit

JustFog Minifit

Voopoo Vmate TC 200W Box Mod

Voopoo Vmate 200W Kit With Uforce T1 Tank

Vaporesso Luxe Kit

Vaporesso Luxe Mod

Tesla Terminator Kit

Vgod Pro Mech 2

Rincoe Ceto Kit

Smok I-Priv Kit