Tesla Terminator 90W Box Mod Review

The Tesla Terminator is a high performance,cost-effective and affordable device. There are no adjustments to be made with this device,which creates a hassle-free vaping experience.It utilizes a single 18650 battery and has a maximum wattage output of 90 watts. It supports atomizers as low as 0.10 ohms and has a maximum current of 30 amps. This unregulated device is a durable and unique mod,which brings the user experiences to the top level of its kind.
The fire button material is made of zinc alloy and uses chromium electroplating surface treatment technology.It has strong metal texture, high performance durability, good touch feeling.
The Tesla Terminator box mod has a simple battery indicator system to tell you when the battery is dead. When the voltage is between 3.0-3.7V, the LED light will flash red. When the voltage is between 3.7-4.2V, the LED light will flash blue. If a single hit exceeds 12 seconds in length, the LED light will flash 8 times. If the battery voltage is below 3.2V, the LED light will flash 15 times in red and power down.
No more need screwdriver to replace battery. The Tesla Terminator box mod takes magnet battery cover. You can simply slide it off and replace battery without tools.
Support two ways to charge, one is using Teslacigs original USB cable to charge your device,you can enjoy 2A fast charging; the other is taking out the battery and use the appropriate charger to charge it.
Baked finish has the following characteristics:coating evenly, firm adhesion, and gloss more durable. This is why most of our devices are using this finish.
Features & Spec:
Dimension: 80*36.5*22mm
Material: Zinc Alloy
Battery:one Hi-drain 18650 cell(not include)
Thread: 510 Thread
Max Output Wattage: 90W
Max Output Voltage:4.2V
Max Output Current:30W
USB: 5V/2A
Min atomizer resistance: 0.1Ohms
Voltage Indicating: 3.0-3.7V(in red) 3.7-4.2V(in blue)
Protections: Over puffing protection/low voltage alert/atomizer short-circuit protection/charging protection

Package:
1 * Terminator Mod
1 * USB Cable
1 * User Manual
1 * Terminaor package

https://www.urvapin.com/

https://www.urvapin.com/limitless-200w-tc-box-mod.html

https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html

https://www.urvapin.com/smoant-charon-218w-zinc-alloy-tc-box-mod.html

Wismec Predator 228W Starter Kit Review from Urvapin

Today I’m going to be reviewing the Predator 228w Kit by Wismec.

The Predator 228w mod has been dubbed by vapers as the “alien killer”, mainly due to older Alien vs Predator Hollywood films, and in my opinion it has only slightly surpassed the Alien 220 device.

You’re most likely aware of Wismec’s Reuleaux series already. While the rx200, rx200s, rx2/3, and rx300 are very popular and are great devices, they have one shared Achilles heel: their 510 pin. While the Predator does not have the power output of some of the other RX models, Wismec has taken a huge step in the right direction and has finally addressed the 510 positive pin issue in the Predator! The Predator 228 Kit comes with the Elabo tank, a bottom airflow sub-ohm tank with large juice capacity and capable of huge cloud production.

First off, the Predator’s design is sublime. The information rich LED screen is crisp and informative. The two separate icons for each battery are a nice touch to point out any charge disparity. The “hidden” fire panel is well-designed and does not easily fire when holding. You will need to give the mod a good squeeze to fire. Adjusting wattage and temperature is fast-scrolling, and changing the mode is quick and easy. The Predator can also have its firmware upgraded!

Additionally, the Predator can charge up to 2amps for both 18650s! While I do not recommend always charging you batteries in your device, in a bind it can charge your 18650s from low to full in about an hour and vaping does not interrupt the charging. The Predator can also reverse charge your cell phone, or other similar devices, with an adapter that’s sold separately. Lastly, replacing batteries is so much easier in the Predator compared to other Wismec RX models. Just push the pin up to release the door and then swap the batteries: easy!

The Elabo tank is just as well-made as the Predator. To refill, simply remove your 510 drip tip and push the top open (as directed by the single arrow on the tank). The fill hole is large enough to cater to both plastic bottles and glass drippers. The tank can use most, if not all 510 drip tips you prefer.

The Elabo tank has two available coil options: a 0.2ohm triple coil and a 0.25ohm NS triple coil. The NS coil is a pressure fitted coil (and does not have any threads to screw into the base). The Predator reads the correct ohms on both coils from start to finish with a +/- 1ohm difference. Both coils are very similar, but I have to say that the 0.2ohm coil is the better of the two because it has a little bit better cloud production. I also prefer the threading to screw into the base, which allows for more eJuice in the tank. Finally, it has a huge adjustable bottom airflow ring for chucking massive clouds.

https://www.urvapin.com/

https://www.urvapin.com/limitless-200w-tc-box-mod.html

https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html

https://www.urvapin.com/authentic-tesla-nano-120w-mod.html

Introduction of Aspire Breeze Starter Kit

Introducing the all new Aspire Breeze Starter Kit. The Breeze is our latest all-in-one device that employs a compact and ergonomic design, no matter how you hold or grip it, it feels good in the hand. The breeze has a built-in refillable tank that holds 2ml of e-juice and is compliant with TPD regulations. It also utilizes our U-tech coil which ensures you a flavorful vape. Not only that, its auto-fire feature adds even more convenience to your daily vaping, no need to press the fire button, just inhale from the drip tip and it will work for you. The fire button also helps further navigate the Breeze.

In addition to its simplicity and good looking in design, the Aspire Breeze Starter Kit is also super easy to use, just inhale from the drip tip without pressing the fire button, the breeze will work for you. Make sure the Breeze has been filled with e-juice before taking a inhale.

Note:
1. Never blow directly into the mouth piece as this could potentially burn the coil and may cause a fire hazard.
2.Replace the drip tip protective cap when the Breeze is not in use.
3. Fill the Breeze from the top, pull off the drip tip section, unscrew and remove the cartridge, you can add your preferred e-juice into the tank. Be aware of the max fill line when filling the Breeze.
4. The Breeze employs U-tech coil to ensure a flavorful vape (Breeze U-tech coils are not interchangeable with Nautilus X U-tech coils.)

The Aspire Breeze Starter Kit can be charged from its Micro-USB charging port, maximum charge current can reach up to 800mA. You can also charge the Breeze by using the charging dock for more convenience.

Charging Dock Specs:
Capacity: 2000mAh
Output Specs: 5V/1A
Input Specs: 5V/2A

 

https://www.urvapin.com/limitless-200w-tc-box-mod.html

https://www.urvapin.com/authentic-ijoy-captain-pd270-237w-tc-box-mod.html

https://www.urvapin.com/authentic-tesla-nano-120w-mod.html

VOOPOO DRAG box mod evaluation

With the high-speed development of the electronic cigarette industry, the players are increasingly demanding on the properties of the box mod. Chip deciding the box mod performance will also increase.
Today we introduce a top potential chip “Gene chip”, carrying the chip is the VOOPOO DRAG. The box mod in both performance and function is very powerful.

System medical examination
The chip support linking PC suite for depth adjustment. Computer PC suite is straightforward, and there are not many options too complicated. Users can custom edit item as follows.

Indicators information editor: the interface supports editing function on its own, that is to say, in addition to the menu and the main screen, and other important information cannot be changed, others are able to edit.

The parameter adjustment: temperature control TCR adjustment, screen display brightness adjustment, smoking seconds adjustment.

The temperature curve set: the equipment’s professional curve of temperature adjustment function is very simple. Just drag up and down can adjust real-time temperature, with five memory block. In regulating, the upper left corner of the graph displays the currently selected temperature and time.

The power curve adjustment: the way is same as the temperature curve, and  shared storage temperature curve pattern, also in the top left conner shows detailed information.

Operation experience
The operation is very simple: press five times ignition key to switch on/off, press three times the ignition key to switch mode, press four times ignition key to adjust the output power of temperature control mode, press up and down button to enter the main menu. After entering the main menu, the first item displayed as normal mode, the second is memory storage curve for professional model, the third for resistance adjustment, the fourth is TCR value adjustment, item 5 for the product serial number, item 6 for the firmware version.

The operation is very simple, even a new players will be able to quickly grasp. According to atomizer value system will set to a recommended power, for beginners is very friendly.

Overall this is a very good electronic cigarette box mod, and according to the official news, the host’s price is not high, and it is highly cost-effective.

http://www.urvapin.com/
https://www.urvapin.com/authentic-aspire-zelos-50w-starter-kit.html
https://www.urvapin.com/aspire-breeze-650mah-2ml-aio-starter-kit.html
https://www.urvapin.com/authentic-tesla-nano-120w-mod.html

Authentic Aspire Zelos 50W Starter Kit

Zelos 50w box mod, a compact and ergonomic vaping mod from Aspire

powered by a 2500mah built-in Li-Po battery. Wattage can reach up to 50W. Variable voltage and wattage device. In addition to its precise TC settings, the new firmware ensures its wattage can also be adjusted under TC mode, with all that added together with the Nautilus 2 mouth to lung 2ml tank. The latest in the Nautilus series, sleek, curvy design equipped with a 1.8ohm BVC coil. Top-fill design keeps things clean and interchangeable coils with other Nautilus coils allows you to personalize your coil/cloud producing preference. Kit available in a range of anodized and matte colors.

Latest BVC coils. Preinstalled 1.8Ω(4.2-5.0V) coil. A 0.7Ω(18-23W) coil also included in the kit. Both coils are interchangeable with all Nautilus series coils.

The Nautilus 2 tank is a quick & clean top-fill tank. Simply hold upright, unscrew the cap, add your preferred juice and vape away . You can drip, drop or pour your e-liquid, no fuss!
Aspire Zelos 50W Kit Features & Spec:
Nautilus 2 Tank
Capacity: 2ml
Size: 22 x 53mm
Thread: 510 thread
Material: Aluminum, Pyrex glass tube

Zelos 50W Box MOD
Size: 78mm (H) x 23(W) x 40mm (L)
Wattage Range: 1 – 55W
TEMP Range: 200 – 600F/ 100 – 315℃
Modes: VW/VV/Bypass/TC-Ti/TC-Ni/TC-SS
Thread: 510 thread
Charging port: USB charging port
Battery: built-in 2500mAh Li-Po battery
Material: Aluminum

Aspire Zelos 50W Kit Package:
1x Zelos 50W MOD
1x USB cable
1x Nuatilus 2 tank (pre-installed 0.7ohm coil)
1x Extra 1.8ohm coil
1x Extra glass tube
1x Extra Drip tip
8x O-rings
1x User Manual
1x Warning card

Aspire Zelos 50W Kit Related Products:
Aspire Nautilus 2 Tank
Aspire Zelos 50W Mod